Solenoid valve coil auto soldering machine solution

One solder module corresponds to two solder joints in the same position for two products.
Put the product into the fixture positioning fixture from the position of placing and taking parts, press the start button, the fixture sends the product to the welding area, the soldering machine starts to work, when each group of solder joint welding is completed, the fixture circulates the product to the position of placing and taking parts.
After the soldering action of each group of soldering modules is finished, the soldering machine gives the signal to the fixture controller, the soldering device returns to the origin, the cylinder sends the cleaning box of the welding device to the bottom of the soldering device, completes the cleaning action of the iron head (any soldering action can be set to clean the iron head once), and moves to the ready area (above the solder joint).When the product arrives, there is no need to move the position, and the solder can be lowered.
Coil soldering machine
1) The whole machine is divided into two parts, the upper part is the whole device of soldering tin, the lower part is the electronic control system.
2) The workpiece is clamped by a fixture and can be welded 25PCS at a time
3) The products that need solder are positioned through the positioning fixture and placed on the positioning pin of the fixture.
4) When the detection mechanism detects that the product is in place, the soldering mechanism will perform automatic soldering.(Stop automatic soldering when no product is detected)
5) After the solder is finished, the workpiece will be removed and transferred to the next process by the operator of the place and take part.